Toshiba Fire TV Edition television software update lets you power on to your last input

The Toshiba Fire TV Edition televisions are receiving a new 6.2.4.2 (build 738566532) software update that adds a highly requested new option to the settings menu. With this update, you can now configure the TV to remain on the input that was last used when it is powered on. By default, the TV will always display the Fire TV home screen when it is powered on, regardless of the state that it was in when it was powered off. To change this behavior, you can now go to Settings > Display & Sounds > Power On and change the setting to Last Input to prevent the TV from loading the home screen every time. It is unknown if the older Element Fire TV Edition televisions will also be receiving this option in a future update.

Follow AFTVnews on Twitter / Facebook and subscribe via email to be the first to learn when new articles go live. Follow me, Elias Saba, on Twitter and Instagram to see what I'm working on before it's posted here.

ShareTweetShare+1

22 comments
  1. Charlie says:

    In my experience, this feature fails to work after the update.

  2. John says:

    I discovered this feature on my Toshiba Fire TV purchased on Prime Day and was installed two weeks ago. Thank goodness, without which my wife would still be complaining…

  3. Auburn John says:

    My older Element Fire TV Edition has not received updated software for this feature. It’s currently running 5.2.6.3 (606753920); no update since 06/14/18.

  4. Robert says:

    Still no way to disable 15 minute power saver. Annoying as hell. Pause a movie come back 15 minutes later and it’s gone. Have to go find it again.

  5. Diane Wicklund says:

    We purchased a Toshiba Fire TV. I have to use my Toshiba Fire remote to access HDM12 everytime I turn on my tv. After clicking HDM12, I can use my DishTv remote for everything else. How can I change this so that I won’t need to click on HDM12 with the Toshiba remote? So frustrating. I tried the above process, but there is no “last input” to select!

  6. Swilley says:

    This was working until a few days ago. No longer. Now when I turn it on the home page comes up with the last input displayed in the right corner. Pain in the butt. Anyone else now having a problem with this?

    • Aaron says:

      Yes I’m having the same problem. It was working up till a few days ago now when you power off and power back on it shows the last input in the upper right hand corner of the home screen you have to use the Amazon remote the click on your last input for the input to show full screen

    • Roger says:

      I’m having the same problem. It won’t start up on last input. It starts on the firetv home screen with the cable input that needs to be clicked to watch TV. “last input” did work for about a month, now not so much.

    • Francisco says:

      How to fix I having that since problems every time I turn on my tv need to select input

  7. Curtiss says:

    Yes. Unfortunately it’s on my 90-year-old non-tech mother-in-laws TV

  8. Roger says:

    I’m having the same problem. It won’t start up on last input. It starts on the firetv home screen with the cable input that needs to be clicked to watch TV. “last input” did work for about a month, now not so much.

  9. BMc says:

    Any way to turn off the the tv with my universal remote? When I press the power button I have to select power off with the toshiba remote

  10. Linda A Italiano says:

    Not only does it not start on correct input, but now for the last few months my Toshiba fire tv won’t work when I switch it back to proper input for Xfinity cable. It says no signal. I have to plug and unplug , system refresh , getting worse. Now I’ve taken to calling comcast but they just told me to call Toshiba.

  11. Patty marconcjnu says:

    Dame thing happening to my moms TV. Judt bought Sunday. Help…its frustrating

  12. Joyce Counihan says:

    I bought the Toshiba Fire TV in 2018. When I turn the TV on it goes to the home screen and not just the last input which it is set up to do. Very frustrating to have to keep changing it over to cable when it is already connected and last used. What can be done to fix this?

  13. RF says:

    Apparently solved the problem by selecting Home as the initial setting, saving it, and then selecting Last Input.

  14. GW says:

    Still having the same problem even with the update. Overnight it seems to revert back to the home screen and then I need to select the input again to watch TV. Maybe this wasn’t such a good buy.

  15. Jason A. says:

    Thank you!!

Leave a Reply to BMc Cancel reply

Your email address will not be published. Required fields are marked *

*